anyone here get good results from an XTi at iso1600????
is it usable? [ in the sense that the pictures will be decent enough]
Printable View
anyone here get good results from an XTi at iso1600????
is it usable? [ in the sense that the pictures will be decent enough]
I don
I have the XTi. I shoot weddings and often with available light that is poor. I do not like the results past 400. At 800 it is just unacceptable. I use my 5D up to 1250 with expectable results. My next upgrade is to replace the XTi.
Mark
hi clemmb,
yes i too am planning to upgrade my xti soon. am kind of leaning towards a 5dmkii but will wait a while for a replacement just in case it comes out soon
I have a couple of test shots taken a fewyearsago. I tested the lens and high iso´s. Quality is ceartinly subjective. Remember that it is a huge difference between what you see on-screen and what you see in a print. I have 13"x19" B&W portrait prints shot at 1600 ISO, no noise reduction, and they look great. Only a hint of "noise" can bee seen at close inspection.
Canon XTi /400D @ 1600 ISO / No noise reduction / LensEF70-300mm f/4-5.6 IS USM @ 190mm, Av( Aperture Value )8.0, Tv( Shutter Speed )1/400
[img]/resized-image.ashx/__size/800x0/__key/CommunityServer-Discussions-Components-Files/7/7077.IMG_5F00_4681_2D00_Test_2D00_for_2D00_TDP_2D0 0_1600_2D00_ISO.jpg[/img]
Canon XTi /400D, LensEF70-300mm f/4-5.6 IS USM @70mm,Tv( Shutter Speed )1/640,Av( Aperture Value )13.0, Underexposed -2EV and ADDED +2EV in post.
Treated in DPP. Luminance noise reduction set to -3, and chrominance noise reduction set to 20
[img]/resized-image.ashx/__size/800x0/__key/CommunityServer-Discussions-Components-Files/7/0844.IMG_5F00_4975_2D00_1600_2D00_ISO_2D00_Minus2E V_2D00_Pluss2EV_2D00_in_2D00_PostProcessing.jpg[/img]
Same as above but this one wasfiltered in Neat Image
[img]/resized-image.ashx/__size/800x0/__key/CommunityServer-Discussions-Components-Files/7/0385.IMG_5F00_4975_2D00_ISO_2D00_1600_2D002D00_2EV _2D00_Added_2D002B00_2EV_2D00_in_2D00_PP_5F00_filt ered_2D00_NeatImage.jpg[/img]
The two last ones are pretty extreme, I know.
Quote:
Originally Posted by jks_photo
Sometimes yes, sometimes no. It depends on the circumstance. There are many, many factors that affect noise, and the ISO setting is just one of them.
- Color termperature of the light and White balance
- Black level
- Contrast and dynamic range
- Saturation
- Display size
- Raw converter
- Noise reduction
- Downsampling filter
Probably the most important factor is display size. Let's say you normally make prints that are 30x20 inches. At this size, it's very easy to see noise, and let's say you never go higher than ISO 400. Now let's sayyou are making a new image for your facebook profile picture. That's only 200 pixels wide, which corresponds to a print size of only 1 inch (at 200 ppi). You can increase the ISO to ISO 6400 (!!) and it will still have the same noise visibility as ISO 400 in the large picture. That's why you can't take web images as proof of noise performance -- they correspond to very tiny print sizes. When you go to make a large print, the noise will be far more visible.
I have used the Rebel Xti extensively at ISO 1600. Although not class-leading (with the release of new Rebel models), I found the noise on the Xti very manageable. I would strongly suggest using noise reduction software (such as Adobe Lightroom, Apple Aperture or Noise Ninja) to lower noise. During the 2 years or so of using the Xti, I found the noise better "surpressed" when printed small (or when displayed on the Web, preferably at a lower resolution). Care should be taken for extra large prints - But again, noise reduction software will greatly improve the quality of your results.
Hope I helped. [:)]
-Aleks
Just out of curiosity, under what circumstances would you be using ISO1600?
I use ISO 1600 under many circumstances. Indoor events (concerts, meetings, parties, etc.) when I
Quote:
Originally Posted by Daniel Browning
Ditto
same here..... I am trying to determine the usability of shots taken at ISO 1600 so I can shoot indoor events with available light. I know it would be easier and safer to just buy f2 or larger aperture lenses but I
[img]/resized-image.ashx/__size/800x0/__key/CommunityServer-Discussions-Components-Files/7/8407.IMG_5F00_2808.JPG[/img]
above is a sample shot taken at the mall. no flash ISO 1600 1/60 f4. no noise reduction or any post processing done to image. If any body wants to... please notify me and I will send you large file.
what do you guys think?? is it okay for ISO 1600 picture??
Definitely. Looks good to me.
thanks Johnny R.