Cokin Filter Holders vs ? , Need Landscape Advice
I posted a thread about ND filters a few days ago, and of course the square drop in filters were mentioned. This got me researching the different brands and I think I am going to go ahead and try to get a system.
I am leaving in two weeks so I need to get somthing ordered now if I want it in time.
The dilemma is that you can't get a Cokin holder. I looked at Lee and its the same.
I found this available but it seems to be over kill to just get a holder. The holder is alone is less than $100 bucks. Would the Matte Box really be any help for Landscape?
[View:http://www.bhphotovideo.com/c/product/483764-REG/Cokin_CZ360_Matte_Box_Model_Z360.html]
So for landscape work what is the best way to head?
The one I posted has the Z Holder. Cokin has the X holder but would it be any advantage for Full Frame. Widest lens I have now is the 16-35mm, someday I may buy the 14mm L.
Is thereholder brand out that would perform as well? Would the actual filters from one manufacture work fine between the different manufactures? it looks to me that some of Cokin's filters might be thicker than would be allowed in some off brand models.
Thanks for the Input
Re: Cokin Filter Holders vs ? , Need Landscape Advice
Quote:
Originally Posted by HDNitehawk
The one I posted has the Z Holder. Cokin has the X holder but would it be any advantage for Full Frame. Widest lens I have now is the 16-35mm, someday I may buy the 14mm L.
The Cokin Z-Pro will vingette at wider than 20mm AoV on FF (seeTrondster's reply inthis thread).
The Lee holders have been out of stock since I started looking at them (maybe as much as a year ago, although I don't check all that often).
For much less than the matte box you linked, B&H has the Schneider Landscape Control Kit, which includes a holder, 77mm adapter, and a 2-stop soft-edge grad ND. Schneider is the parent company of B+W Filters, and their rectangular filters are made of Schott glass, instead of resin like most other rectangular filters). It is similar in size to the Z-Pro (i.e. it may vigenette at 16mm, although it looks thinner than the Cokin holder), meaning it will take Cokin Z, Lee, and Singh-Ray 4" filters.
EDIT: you mentioned the 16-35mm II - for that, you'd just exchange the 77mm adapter included in the above-linked kit for an 82mm adapter. Oddly, B&H doesn't sell them, but Adorama does (link); note that it's branded Century Optics, which like B+W is a sub-brand of Schnieder, aimed at the film/cinema market.
I also notice that the sell just the 4" holder (no grad ND) under the Century brand, and it might even be the same as the Lee holder (except that it is actually in stock at Adorama) - note the description on the Adorama page, which matches that on the Schnieder Optics website: "Schneider Optics is pleased to offer the new 4” Filter Holder. Manufactured in partnership with Lee Filters, the 4” Filter Holder is made to hold Schneider Motion Picture and Television 4mm thick water-white Schott glass filters that are available in 4x4 and 4x5.65 sizes."
Re: Cokin Filter Holders vs ? , Need Landscape Advice
What's wrong with a P-series Cokin and the cheap adapter ring and frame? I'm seriously considering this Frame / Grad ND kitand an adapter ring.
Re: Cokin Filter Holders vs ? , Need Landscape Advice
For an interesting comparison between the Cokin and Lee filter systems, have a look at this short video by Darwin Wiggett:
[View:http://www.youtube.com/watch?v=GXGQYY84PwI&feature=player_embedded]
Re: Cokin Filter Holders vs ? , Need Landscape Advice
Quote:
Originally Posted by Sean Setters
[View:http://www.cokin.co.uk/pages/cokinP.htm]
If I am wrong about this please correct me, as this is just my understanding so far. From what Ihave read at Cokin website, P series is for 28mm and above. If you have the special P-Wide holder you can go down to 20mm but only use one filter. On your 7D I think the P series is adequate but from what I read so far using the 5D and the 24mm I need to go to the Z system. If I want to ger real wide with the 16mm I would need theX system.But the Pmay be a cheaper alternative to just get me by till I can get the other system.
Jonathan, thanks for the link. From other articles I had read it appeared that the Lee would be the better choice. But apparently that's not the case.
John, I am still going over your suggestions. The Schneider system seems kind of pricey, I am going to try and find some reviews on it to see how it stacks up. If it were a cheaper system it would be an easy decision for me, buy it to get by then get what I really want later.
Re: Cokin Filter Holders vs ? , Need Landscape Advice
John
I have been researching the Schneider system all morning. From the price it should you would think it would give you extremely good quality.
I have a few concerns, it looks like they modified a Lee holder to hold 4mm instead of 2mm. If you use the Cokin 2mm filters with this system wouldn't you have to take it apart and re modify it? Otherwise the 2mm filter wouldn't sit properly.
Looking at Schneiders other items and what I think I need (which may be in error). It would be quit an outlay for filters.
These are the things I see that I might need to go with it:
[View:http://www.bhphotovideo.com/c/product/399444-REG/Schneider_68050756_4x5_65_Graduated_Neutral_Densit y.html]
[View:http://www.bhphotovideo.com/c/product/399440-REG/Schneider_68050655_4x5_65_Graduated_Neutral_Densit y.html]
[View:http://www.bhphotovideo.com/c/product/398884-REG/Schneider_68040956_Neutral_Density_ND_0_9.html]
[View:http://www.bhphotovideo.com/c/product/398948-REG/Schneider_68013144_Circular_True_Polarizing_Filter _4.html]
A small outlay of $1,399 to just get started down the Schneider path. About twice the money, would shot glass really be worth it at over 2x the money?
I had been trying to figure out the Horizontal / Vertical tag. I know it is the way the gradation lays on the glass, but I am not sure which way is which.
I made a few phone calls this morning, both local and to some internet shops. One of the reps for Cokin said it was next to impossible to get a Z holder any where.
Rick
Re: Cokin Filter Holders vs ? , Need Landscape Advice
Quote:
Originally Posted by HDNitehawk
A small outlay of $1,399 to just get started down the Schneider path. About twice the money, would shot glass really be worth it at over 2x the money?
I'm inclinced to think no on that one. The glass is likely to be more scratch-resistant, but unless you're using the filters very frequently, I think that's unlikely to be a huge advantage.
Quote:
Originally Posted by HDNitehawk
I had been trying to figure out the Horizontal / Vertical tag. I know it is the way the gradation lays on the glass, but I am not sure which way is which.
You want the vertical, not the horizontal.
Vertical<span style="white-space: pre;"] Horizontal
https://www.schneideroptics.com/Ecom.../68-050156.jpghttps://www.schneideroptics.com/Ecom.../68-050155.jpg
With the horizontal, sliding it up and down in the holder would not change the position of the dividing line. The horizontal filters are intended for cinematographers, I think.
Quote:
Originally Posted by HDNitehawk
I made a few phone calls this morning, both local and to some internet shops. One of the reps for Cokin said it was next to impossible to get a Z holder any where.
That's really the only reason to consider the Schneider system - neither the Cokin Z nor the Lee systems are currently available. In fact, Cokin's website has been down since may, showing only an ISP logo (maybe Cokin couldn't pay the bill?).
Perhaps you could consider just getting the filters without the holder, and simply hand-holding them for your shots.
Re: Cokin Filter Holders vs ? , Need Landscape Advice
Quote:
Originally Posted by neuroanatomist
In fact, Cokin's website has been down since may, showing only an ISP logo (maybe Cokin couldn't pay the bill?).
I'm not having a problem accessing Cokin's website...
Re: Cokin Filter Holders vs ? , Need Landscape Advice
Quote:
Originally Posted by Sean Setters
Quote:
Originally Posted by neuroanatomist
In fact, Cokin's website has been down since may, showing only an ISP logo (maybe Cokin couldn't pay the bill?).
I'm not having a problem accessing
Cokin's website...
Cokin is a French company, and their French site, www.cokin.fr, is down. The USA site (www.cokin.com) redirects to the defunct French site. Reportedly, Cokin is having financial troubles...
The .co.uk site that you linked is not Cokin, it's run by Intro 2020, a distributor of many photography products. Nice for information about Cokin filters, but useless if you want to buy them. They don't sell the products to consumers, they distribute to brick-and-mortar and online retailers in the UK. The actual vendors (at least, the few online shops I checked) don't have the Cokin holders in stock, either.
Re: Cokin Filter Holders vs ? , Need Landscape Advice
Gotcha. That makes sense.
Re: Cokin Filter Holders vs ? , Need Landscape Advice
Quote:
Originally Posted by neuroanatomist
<p sizset="40" sizcache="12"]Cokin is a French company, and their French site, [url="http://www.cokin.fr/]www.cokin.fr[/url], is down. The USA site ([url="http://www.cokin.com/]www.cokin.com[/url]) redirects to the defunct French site. Reportedly, Cokin is having financial troubles...
<div style="CLEAR: both"]</div>
From dpreview posted July12th:
<p style="padding-left: 30px;"]"Kenko-Tokina has bought French filter maker Cokin. Cokin's parent company went into administration in November 2010, with supplies of the company's products becomingly increasingly scarce. The Japanese lens and accessory maker has said it will retain the square filter specialiast as an independent company, rather than simply utilizing the well-recognized brand-name."
http://www.dpreview.com/news/1107/11071104cokinbuyout.asp
Re: Cokin Filter Holders vs ? , Need Landscape Advice
Moving on Sean's suggestion, I procrastinated long enough that the ringfor Cokin Wideframe is not available. So that one is out now.
I talked to several store reps, local and on the internet. Apparently the market collapsed on these type of filters, there was no demand and that is why Cokin is having problems and is impossible to get.
I found one other option The Hitech Filter Holder 85mm/Cokin P for Wide Angle Lens
[View:http://www.bhphotovideo.com/c/product/158920-REG/Hitech_HT1009_Filter_Holder_for_85mm_Cokin.html]
I called the B&H rep, he checked and said he couldn't say with 100% certainty that this holder would not vignette on a 24mm L lens. He didn't think it would. I tried to find some information using google and yahoo but no luck yet.
Any idea where I might find a review on this to see how wide I can go?
Re: Cokin Filter Holders vs ? , Need Landscape Advice
I think I found the answer to my question. On another forum someone Say's they emailed Hitech and asked them the same question
Hitech has one with 2 filter slots. I emailed them and got this response on their vignetting. "The 85mm system can go to 28mm (full frame) without vignetting."
Looks like this would not be the solution for the 24mm.
