http://www.the-digital-picture.com/N...aspx?News=2821
Printable View
Getting ready to install it now.
Cool, Thanks Sean!
woot woot!!! Thanks Sean!
Just did. Of course, simply for the sake of vanity, I changed the filename prefixes to my initials.Quote:
Originally Posted by M_Six
Sent from my Nexus 7 using Tapatalk 2
Done. Piece-o'-cake. The max auto-ISO will be very nice.
Updating as we speak and will have to play around with it tomorrow.
Love the max ISO! Very cool firmware update! Only thing I don't get is why under the RAW image processing am I not able to do anything with the Peripheral illumin. correction, the distortion correction or the Chromatic aberration correction. All 3 say Disable. How do you use these features?
I don't have a 7D yet, but I just updated firmware on my 550D. Despite meticulously following directions over and over I kept running into problems. Until I switched SD cards
my Duracell ProLine 64GB SDXC Class 10 Card would not let me upgrade... but my Panasonic 8GB Class 4 SDHC would.
So if someone runs into this maybe I can save you the frustration I was having the last hr.
Damn, so now that my 7D is useful again, how am I going to stop my CDs from falling over?
What is a CD? Is that like an Eight track?Quote:
Originally Posted by Dr Croubie
;)
Well played.Quote:
Originally Posted by Dave Johnston
Interesting! I have a specific CF card I use for firmware updates, although I don't really know why - probably because the card is pretty useless otherwise. It was the first one I bought after getting my 7D...I ordered the 7D from Amazon with a pair of 8 GB Extreme Pro 60 MB/s cards, but the camera came first, so I stopped by a local shop and bought a 2 GB Ultra II so I could take pictures immediately. But...I've never had any issues with a firmware update. :pQuote:
Originally Posted by Kombi
Denise you need to register the lens in the camera with the new EOS Utility to use the functions in question.Quote:
Originally Posted by ddt0725
You should download the new Revised 7D 2.0 Manual from 06/28/2012 in the link below:
http://www.usa.canon.com/cusa/consum...uresAndManuals
Image Raw Processing is from pg 192-196. Your question is on pg.196
Rich
Thank you, Rich!
Updating right now. I just did a quick test of the RAW buffer depth before the update (V1.2.2) and I'll let you know how much better it is with V2.0.0
Done and it went fine. First thing I did was to set the auto ISO limit to 1600 and, as I said above, I tested the new burst depth.
I shot a clock in manual, 1/100, f/2.8 and ISO 100. This was the max aperture of the lens and I was in MF.
V 1.2.2: between 23 and 25 shoots in 3 secs
V 2.0.0: between 31 and 32 shoots in 4 secs
=> It works!! :D
I know some will say you just got one sec more but this second matters when, like me, you tend to start just a bit early :o
I got the same last night. 32 shots in 4 seconds. Then a brief pause and more shots.
Done it, no problems, but haven't played with any of the new functionality yet.