Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Feedback on my first landscape shot from my 5Ds

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member
    Join Date
    Aug 2012
    Posts
    205

    Feedback on my first landscape shot from my 5Ds

    I recently took a few shots of my grandfather in his ANZAC parade and went back to his house afterwards so I snapped a shot of the view from his backyard in Kiama, NSW.

    I really like this shot but was hoping to get some feedback on anything I should change?

    http://i.imgur.com/lI1Zfb7.jpg

    I've just realised it has compressed it and it doesn't look right :/
    Last edited by Squidy; 04-26-2016 at 12:47 AM.

  2. #2
    Senior Member Dave Throgmartin's Avatar
    Join Date
    Jan 2009
    Location
    Northern Illinois
    Posts
    1,061
    It's tough at web resolution to really notice a difference between 20 MP and 50 MP.

    Dave

  3. #3
    Senior Member
    Join Date
    Aug 2012
    Posts
    205
    Agreed. Where is a good site to host it for full resolution?

  4. #4
    Senior Member Dave Throgmartin's Avatar
    Join Date
    Jan 2009
    Location
    Northern Illinois
    Posts
    1,061
    Quote Originally Posted by Squidy View Post
    Agreed. Where is a good site to host it for full resolution?
    I like using Flickr. I only upload at 2,000 pixels size though!

    Dave

  5. #5
    Senior Member
    Join Date
    Jan 2009
    Location
    Planet Earth
    Posts
    3,110
    What is going on with the sky?
    Was that because of compression?

  6. #6
    Senior Member
    Join Date
    Aug 2012
    Posts
    205
    I think it's due to compression unfortunately

  7. #7
    Senior Member
    Join Date
    Jan 2009
    Location
    Central Kentucky
    Posts
    3,619
    Color banding....can be from JPEG artifacts or compression, also can occur from changing color sRGB to CMYK such that color transitions are not smooth.

    It can be corrected by selecting the sky, moving the selection to a new layer and use the spatter filter on that selection (it's in the filter gallery) It is similar to adding noise but it smooths out color transitions better.

  8. #8
    Senior Member
    Join Date
    Aug 2012
    Posts
    205
    I shot in Adobe colour in the camera and converted to sRGB in Lightroom so that might be it. Will check out colour banding and see if I can fix it as I'd love to get a print of this one. Thanks for the help

  9. #9
    Senior Member
    Join Date
    Aug 2012
    Posts
    205
    Cheers, I heard Flickr was getting sold or something so I didn't start one up but will check it out.

    Also, I just exported a full size JPG from Lightroom and it doesn't seem to have the (noticeable) colour banding, just when I squish it down to a smaller jpg

  10. #10
    Senior Member
    Join Date
    Nov 2011
    Location
    Big Mouse Florida
    Posts
    1,190
    Not speaking to resolution - online is tough, and since jpg is 8 bit (I now have a 10 bit monitor and oof what a difference those 2 extra bits make) my comments are on exposure and composition.

    Exposure looks really good - spot on, only if you were planning on lots of post production work would drift this to the right a bit (over expose and then pull down highlights to gain shadows) but there are few shadow elements to try to pull - if this had some animal in the tree shadows.... etc but it doesn't.

    Composition to me is straightforward and uses the leading line of the stone fence enter the picture though think about ending it in the pic somewhere closer to 1/2 way it seems to cut the pic and the lower right gets lost.

    If you wanted to do more post the wires running through the frame could be quickly fixed w/ a few clicks in photo shop.

    overall very pleasant.

    Happy clicks.

    Mike
    If you see me with a wrench, call 911

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •