Results 1 to 3 of 3

Thread: 40D PC sync port problem - argh

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    Dec 2008
    Posts
    2

    40D PC sync port problem - argh



    For typical studio work, I shoot with a 40D connected to one of my AlienBee strobes via the PC/sync port. This worked just fine, until recently. Now, the strobe will randomly not fire, and it's definitely the 40D. My old 20D body works fine, and I've tried different cables and strobes - it's definitely isolated to the 40D body. The most maddening thing is it's completely inconsistent. Sometimes it will fire only in vertical grip-up orientation, or if I'm holding down on the plug a certain way (which is rather annoying anyway), but only for a little while, and then it will stop or start working even if nothing has changed. I've tried screw-in cables - doesn't help. I've cleaned the contacts, tried just about everything. Anyone else have this issue? I hate to have to send it to Canon for something like this, but I'm starting to get the feeling I'll have to.


    BTW, is it me, or is the PC/sync port just an engineering failure? It doesn't seem to be particularly optimal to me, compared to most other connector types I've used for various applications.

  2. #2
    Administrator Sean Setters's Avatar
    Join Date
    Dec 2008
    Location
    Savannah, GA
    Posts
    3,366

    Re: 40D PC sync port problem - argh



    Get Cybersyncs. Then you'll be triggering the AlienBee using the hotshoe of the camera (which is a much more reliable means of triggering).





    :-)

  3. #3
    Junior Member
    Join Date
    Dec 2008
    Posts
    2

    Re: 40D PC sync port problem - argh



    Yeah, that's my long term plan. Was hoping I could find a cheaper short term solution.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •