Zoom Lens Pistol Grip

[felix.howitt]

I'm thinking of getting the Canon 100-400 L IS and one of its main uses would be watersports.


Of course half the time I would be shooting from a moving boat an so a tripod isn't really very helpful, and as this is a heavy lens handholding could get quite uncomfortable after a day on the water..





Does anyone know if any kind of pistol grip or other handle to attach to the tripod mount on the lens is available?


I've seen a few on the internet, but most of them seem to be ether out of production or designed to mount to a particular lens..


Any help would be much appreciated

[piiooo]

Welcome toour forum, Felix.


I use a BushHawk320D mount with my 100-400 and it works very well for me. It can be used with any handholdable telephoto lens with a tripod collarand it can be adjusted tothephysique of any photographer. The only complaint is that the shoulder pad comes off and can be lost easily.They provide parts if you lose or break something.


Also, because you hold your camera/lens (=heavy)by themount (=relatively light) attached to the bottom of the lens (tripod ring), the whole thing may initially feel a little unsteady becausethe center of gravity is somewhat high.It does not take long to get used to it.


If yougive it a trymake sure you chooseshutter release cable specific to your camera.


Good luck

[felix.howitt]

Ooh I hadn't seen the BushHawk. Thank you it'scertainly worth considering, don't suppose you know of a smaller version though? It seems they don't do one without the shoulder stock..


What kind of photography do you use yours for? Do you find the stock gets in the way at all?

[piiooo]

Hey Felix,


Unfortunatelly, I do not know of anything smaller. Based on my experience with my BushHawk, Ihave tosay that anything smaller or lighter thanthat will result in decreased stability. The stock and the front grip are removable but I do not recommendtaking them offfor the same reason. The stock does not get in the way at all, at least in my case. I use mine for wildlife/bird photography. I find it comfortable when I walk through marshes with the camera/lens/grip on my shoulder and it is very easy to bring the camera to shooting position.


Take care,


Pete

[Sheiky]

Perhaps it sounds stupid, but the tripod ring on your 100-400 has just a normal type of thread, which would easily fit a DIY handle... Like the handles you can screw on the sides of an angle-grinder and other technical machinery..

[bob williams]

Perhaps it sounds stupid, but the tripod ring on your 100-400 has just a normal type of thread, which would easily fit a DIY handle... Like the handles you can screw on the sides of an angle-grinder and other technical machinery..

Great idea---and it works, I just had to try it. Pulled the handle off of my ryobi angle grinder and it fits perfectly---Now the down side, I am so used to the push-pull on my 100-400, The handle seems awkward and not really usefull---But, if this is what you're looking for, you found an inexpensive solution.


PIIOO, How do you like your Bushhawk---I have been thinking about one.





Bob

[piiooo]

There is another contraption worth mentioning: a monopod and a fishing belt with a rod holder. You mount the camera/lens on your monopod, but you extend the monopod just enough to reach your belt, then stick the end of the monopod into the rod holder in yourfishing belt. It takesmostweight of the camera off your sholdersandyou still haveboth hands available tostabilize and navigate your camera/lens.The monopod works better if it has a head, because it isused on a slight angle.


EDIT: Here is a link to asimilar solution.

[neuroanatomist]

There is another contraption worth mentioning: a monopod and a fishing belt with a rod holder.

Manfrotto actually sells a monopod belt pouchfor the same purpose.For what it is and does, it's way overpriced, even for 'camera gear'.

[andnowimbroke]

They also have have belt clips like that for holding flags in parades. It's been a while since I've been in the scouts and can't remember exactly. It could have been a protective cup turned inside-out for all I know. Funding was a little weak in my part of the world