How to choose a lens for Canon 7D video?

[ddi]

I am buying Canon 7D for shooting video and still photos. I only have
Canon EF-S 17-85mm f/4-5.6 IS USM lens. Would that lens be of any use
for video on 7D? What lens would you recommend for video (some of it in
low light) on 7D if I can only get one lens for now?

Thanks, ddi

[Bombsight]

I suggestthe fastest ones you can afford. [8-|]

[Sean Setters]

Do you need a zoom or can you get by with a prime? You'll generally get wider apertures at lower cost if you stick to primes, yet you'll lose the convenience of recomposing without walking. ;-)

[ddi]

Unfortunately one prime will not be enough, I need more flexibility. Unless you think I can also use the 17-85 IS I have and combine the two?

[ddi]

Do you need a zoom or can you get by with a prime? You'll generally get wider apertures at lower cost if you stick to primes, yet you'll lose the convenience of recomposing without walking. ;-)
<div style="clear: both;"]</div>

How sensitive are newer Canon models to frequent lens changes (for working with a set of primes)?

[Sean Setters]

How sensitive are newer Canon models to frequent lens changes (for working with a set of primes)?
<div style="clear: both;"]</div>

How sensitive? You mean how much dust will start collecting on your sensor? Quite a bit, actually. Those things seem to be a magnet for dust as far as I can tell. Most of the time, it isn't that detrimental to image quality. However, for optimal results, you need to practice the best methods for changing lenses (turn camera off so sensor is not electro-statically charged, keep body's lens mount facing downward while not connected to a lens, etc). If the dust spots start to bother you, you can always use the dust removal feature in Digital Photo Professional, or else have the sensor cleaned or try to clean it yourself (can be very risky unless using the blower method).

[ShutterbugJohan]

changing lenses (turn camera off so sensor is not electro-statically charged

I cannot speak for other manufacturers' products, but EOS Digital SLRs
with Canon CMOS image sensors do not carry electrostatic charges at any
time. Also, when DSLR image sensors are discussed, it's important to
remember that the surface of the sensor itself is never exposed to dust.

[ddi]

Thank you all for your advice. I think it's going to be either EFS 17-55mm f2.8 IS USM or EF 24-70mm f2.8 L USM as soon as I get the $ together (not yet sure which one to complement my 18-85mm). I was tempted to go for a couple of primes, but fear I will be too limited unless I have a full set and that frequent changes will give me too much dust trouble.

[bouwy]

I am buying Canon 7D for shooting video and still photos. I only have
Canon EF-S 17-85mm f/4-5.6 IS USM lens. Would that lens be of any use
for video on 7D? What lens would you recommend for video (some of it in
low light) on 7D if I can only get one lens for now?

Thanks, ddi



<div style="clear: both;"]</div>

Canon EFS 17-55mm f2.8 IS USM lens or for an extra few $ the Canon EF 24-70mm f2.8 L USM. I have both and they work well on the 7D for video

[Jon Ruyle]

I hope I'm not stating the obvious (well, okay, I know I *am* stating the obvious, but still...), don't underestimate the importance of IS for video. You need IS or a tripod unless you have far steadier hands than mine.


Inexpensive fast primes made by canon do not have IS. In fact I think their only IS lens faster than f/2.8 is the 200mm f/2. Not cheap