Results 1 to 4 of 4

Thread: Protective front element

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member
    Join Date
    Dec 2008
    Location
    Anaheim, CA
    Posts
    741

    Protective front element



    Hello everyone,


    What is the protectivefrontelementon this lens? Is it just a regular white glass? Does it act like a filter? In the review of this lens, Bryan said that this front element can be replaced easily and inexpensively should something happened. I know technically any lens' front element can be replaced, but why are only supertelephos and the 300 f/4L IS have these protective front elements.By the way, today I tried to clean my 1-week old 500 f/4L IS' front element and found out that it was much tougher and stickier to do theusual circular mothion as though this front element is not made of smooth glass comparing to my other lenses.


    Thanks for the replies.


    Nate

  2. #2

    Re: Protective front element



    Nate,


    First of all, congrats on the lens. []


    As to your question, I believe it acts like a filter. I watched this link some time ago, and it shows the manufacturing process of the 500/4L. At one point in the assembly the worker screws what appears to be a large filter on the lens. I believe, but cannot prove, that that is the protective front element. Also, I know you don't use UV filters, but here are the reasons I believe that Canon likes UV filters:
    • Canon sells them (but B+Ws are better)
    • Canon makes lenses (i.e. 16-35) that require a filter to complete the sealing
    • A Canon rep told me that he recommends using them
    • If the paragraph above is correct, Canon uses a protective filter on the supertelephotos.

  3. #3
    Senior Member
    Join Date
    Dec 2008
    Posts
    327

    Re: Protective front element



    I should point out that the protective front element is not flat. It is slightly curved--a meniscus lens with no contribution to focus. The curvature is to prevent ghosting due to internal reflection, as described in Canon's EF Lens Work III.

  4. #4
    Senior Member Fast Glass's Avatar
    Join Date
    Dec 2008
    Location
    Ferndale WA
    Posts
    1,185

    Re: Protective front element



    Quote Originally Posted by wickerprints


    I should point out that the protective front element is not flat. It is slightly curved--a meniscus lens with no contribution to focus. The curvature is to prevent ghosting due to internal reflection, as described in Canon's EF Lens Work III.
    <div style="CLEAR: both"]</div>




    Interesting, I didn't know that.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •