Results 1 to 6 of 6

Thread: Easy-to-clean UV/protection/waterproofing filters...?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member
    Join Date
    Dec 2008
    Posts
    759

    Easy-to-clean UV/protection/waterproofing filters...?



    So, i'm about to buy a 70-300 L (having just sold my non-L to my sister after only owning it 8 months, it's downright blurry at 300mm...)


    anyway, i'll quote directly from the review on this site first:


    Fluorine anti-smear coating has been applied to the 70-300 L's front and rear elements... The 70-300 L was noticeably easier to clean than the other two lenses - I
    basically wiped the oil right off the lens with only a swipe of a
    microfiber cloth.
    The fluorene coating is going to be especially useful in the field where
    the dirt typically shows up most frequently...

    but then:


    A rubber gasket can be seen near the lens mount - this is a weather-sealed lens.
    It has been confirmed to me that this lens, like most other non-super telephoto lenses, requires a filter for complete sealing.




    So, i buy a lovely easily-cleanable lens, and then am forced to put a UV filter over the top of the lovely easy-clean element to waterproof it.


    I've read so many pro/con UV filter discussions, and an article or two comparing different brands, but which ones are nicely easy to clean? If i'm going to be using this in the rain, i want to be able to clean off water specs from the front, nothing ruins a good shot more than 'lens-droplet-bokeh'.


    Suggestions?
    An awful lot of electrons were terribly inconvenienced in the making of this post.
    Gear Photos

  2. #2
    Senior Member neuroanatomist's Avatar
    Join Date
    Dec 2008
    Location
    Boston, MA
    Posts
    3,878

    Re: Easy-to-clean UV/protection/waterproofing filters...?



    Personally, I use B+W MRC UV filters on all my lenses. I find the coating very easy to clean (much easier than the front elements of most lenses, and reportedly easier than other high-quality filters such as the high-end Hoya line).

  3. #3
    Senior Member
    Join Date
    Dec 2008
    Location
    Planet Earth
    Posts
    3,110

    Re: Easy-to-clean UV/protection/waterproofing filters...?



    Dr Croubie


    I use the B+W filters and they are very good and they are what I use. I have to agree with everything Neuro said except one item, I find the MRC coatings somewhat of a pain to clean. I use a microfiber cloth, cleaning fluid and a blower. Maybe there is some technique diffrent he uses. Or maybe it is just my perception of what easy should be. Don't get me wrong they clean up fine it just seems the coating hold lint more than some cheap filters I have had. Usualy a few puffs of air take that right off.



  4. #4
    Senior Member
    Join Date
    Dec 2008
    Posts
    300

    Re: Easy-to-clean UV/protection/waterproofing filters...?



    Quote Originally Posted by Dr Croubie





    A rubber gasket can be seen near the lens mount - this is a weather-sealed lens.
    It has been confirmed to me that this lens, like most other non-super telephoto lenses, requires a filter for complete sealing.




    So, i buy a lovely easily-cleanable lens, and then am forced to put a UV filter over the top of the lovely easy-clean element to waterproof it.






    Here are my feeling about that bit of advise. It thinks it a crock of ... What kind of weather are they talking about?


    First let me say, even with a filter they are not Water Proof. They are simply weather "Resistant".


    I might not be an expert on the matter or their reasoning behind comments like that. But it doesn't make sense to me that Canon would make high quality optics just so you have to purchase something else that can probably reduce overall Image Quality by adding another air spaced glass element in front of it.
    If you're going to be using your camera and lenses in an environment where water can leak into your lens you probably shouldn't be there first place. If there is that much water or it's raining that heavy, what is to stop it from seeping around the filter threads? The filter does not have a rubber gasket to make a water tight seal does it?
    What kind of weather are they talking about anyways? Condensation from rapid changes in temperature on the lens elements or heavy rain, either way adding another air spaced piece of glass with just a few fine unsealed threads won't stop it.



    If you're just shooting in light rain why wouldn't the lens hood help keep water drop off the lens enough. What's to stop water from getting into your camera? I've seen a few people shoot in the heavy rain who don't use filters. They prefer to cover their camera and lenses to protect their equipment from the rain. http://www.kata-bags.com/


    Having said that, I know some people feel strongly about using filters. They have their opinions and reason and can keep them. I even use one occasionally myself.
    Can a filter save you lens in the event you hit something with it? Of course it can, but then if the seal on the lens is so bad that you need a filter to seal out the weather you need to be careful that when that filter shatters you don't get any fine glass slivers down into your lens..


    On Edit:
    FYI, nowhere in the manual for the lens does it say it requires a filter to complete any weather seal. It does mention the rubber o-ring at the mount but says nothing about completing any weather seal. It does however say that the hood can be used to protect from rain.


    Why wouldn't canon say anything about using filters to complete a weather seal in their manuals for these lenses.
    http://gdlp01.c-wss.com/gds/3/0300004673/01/ef70-300f4-56lis-usm-en.pdf


    The only thing the manual says about filters is that they are sold separately and that you can attach filters to the filter mounting threads on the front of the lens.





    From the Canon Web site, the overview of the lens.
    "Designed to deliver ultra-high quality images along with lightning fast
    operation, the new Canon EF 70-300 f/4-5.6L IS USM telephoto zoom lens
    brings a favorite zoom range to the celebrated Canon L-series of lenses.
    It features two Ultra Low Dispersion (UD) elements for improved image
    quality and reduced chromatic aberration, incorporates a floating
    focusing mechanism for sharpness from close up to infinity, plus an IS
    system that increases usability by approximately four stops. The Image
    Stabilization system also features a function that allows it to continue
    to operate, even when used on a rigid tripod. An optional Canon Tripod
    Mount C (W II) is available as an accessory, for balanced mounting on a
    tripod or monopod. Gleaming white on its exterior, the lens is dust-
    and water-resistant, and now also features a newly-developed Fluorine
    coating that resists smears and fingerprints, and significantly eases
    lens cleaning.
    For any serious and critical EOS user, this new L-series
    lens represents an excellent -- and portable -- solution to versatile
    telephoto lens shooting."

    "Additionally:
    Weather sealing (resistant against dust and water) when used with a weather sealed camera body. Weather sealed Canon products are not completely sealed from the
    environment, they are merely more resistant than non-sealed versions."



  5. #5
    Senior Member neuroanatomist's Avatar
    Join Date
    Dec 2008
    Location
    Boston, MA
    Posts
    3,878

    Re: Easy-to-clean UV/protection/waterproofing filters...?



    Quote Originally Posted by HDNitehawk
    I have to agree with everything Neuro said except one item, I find the MRC coatings somewhat of a pain to clean. I use a microfiber cloth, cleaning fluid and a blower.
    <div>


    I use a rocket blower and a LensPen (I have both the standard and the FilterKlear flavors, no real idea what the difference is between them, if any).


    Quote Originally Posted by tkerr
    FYI, nowhere in the manual for the lens does it say it requires a filter to complete any weather seal.
    </div>


    According to the manuals, only four lenses require a filter to complete the sealing:
    • 16-35mm f/2.8L
    • 16-35mm f/2.8L II
    • 17-40mm f/4L
    • 50mm f/1.2L



    What these lenses have in common is that all of them have an 'internally' moving front element (the first three move with zooming, the 50L moves with focusing), which is noted in the manuals.


    For other lenses, Bryan often states something along the lines of, "It has been confirmed to me that this lens, like most other non-super telephoto lenses, requires a filter for complete sealing." I take that to mean he called Canon support, emailed Chuck Westfall, or something like that. Why doesn't Canon state that in the manual? I can't say. But their manual for the TS-E 24mm f/3.5L II clearly states that the EF 1.4x II and 2x II Extenders cannot be used with the lens, when in fact, they can.


    So, does the 70-300 L require a filter? Unlike the 4 lenses listed above, I'm not 100% certain of that. I do know if I had that lens, I'd put one on, just in case.

  6. #6

    Re: Easy-to-clean UV/protection/waterproofing filters...?



    I

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •