Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Shoulder Strap Help

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    Jul 2012
    Posts
    4

    Shoulder Strap Help

    So I'm looking at upgrading the strap on my 60D from the Canon strap and I think a shoulder strap would be most functional. The one issue I have is that everyone on the forums tends to lean towards the Black Rapid but I'm not sold on using the tripod mount for my strap.

    Does anyone have any suggestions on shoulder straps that use the actual strap connections?

    Can anyone give me a good reason for why I shouldn't really care or be concerned by using the tripod mount?

    Thanks everyone,
    Brian

  2. #2
    Senior Member neuroanatomist's Avatar
    Join Date
    Jan 2009
    Location
    Boston, MA
    Posts
    3,890
    Definitely recommend the Blackrapid. I'm not aware of any shoulder straps that use the regular strap lugs (although I've seen lots of people wearing the Canon strap across the chest). One issue I could see with a shoulder strap and the regular lugs is that makes it awkward to get the camera into shooting position. The upside down position with the BR strap is fast to lift to the eye.

    About the tripod socket - what do you use it for? Do you actually thread your open socket onto the 1/4"-20 screw on a platform every time you shoot from a tripod? Or do you use a quick-release plate? (If you don't, I'd consider it!)

    If you do use a QR plate, what kind? I used the Manfrotto RC2 plates for a while - in that case, BR makes a FastenR-T1 which replaces the Manfrotto D-ring (and is designed to support a load). You simply unclip the carabiner from the FastenR to mount the plate to the clamp. I had several of those, one for each plate. They were great, although the slight play between plate and clamp led me to Arca-Swiss type plates/clamps eventually.

    Currently, I have Wimberley/RRS plates on all cameras and tripod collars. I attached the BR FastenR-3 lug to a Kirk 1" clamp (semipermanently with a bit of Loctite Blue), so I can easily move the BR strap connection point from camera to tripod collar or remove it to mount to a tripod/monopod clamp. It's a great system, IMO.

  3. #3
    Senior Member Mark Elberson's Avatar
    Join Date
    Jan 2009
    Location
    Medford, NJ
    Posts
    1,045
    I use a BosStrap by BosTail to attach my Black Rapid strap to the strap connectors.

  4. #4
    Senior Member
    Join Date
    Jan 2009
    Location
    Planet Earth
    Posts
    3,110
    +1 for the Black Rapid is the way to go, it is the best I have found. You can comfortably carry your camera without it weighing on you.

    Quote Originally Posted by badbnl1533 View Post
    Can anyone give me a good reason for why I shouldn't really care or be concerned by using the tripod mount?


    Because it is the way to hook up the Black Rapid, and the comfort of the Black Rapid is worth it. That is enough reason for me.

  5. #5
    Senior Member
    Join Date
    Jan 2009
    Location
    Planet Earth
    Posts
    3,110
    If you haven't been to Black Rapid's website I would recommend going to answer some of your questions.
    Watch the video is very informative. http://www.blackrapid.com/product/camera-strap/rs-7/

  6. #6
    Senior Member ham's Avatar
    Join Date
    Jan 2009
    Posts
    384
    When I need a shoulder strap, I use my blackrapid.

    Most of the time I just have one of these wrist straps http://www.gordyscamerastraps.com/

  7. #7
    Senior Member
    Join Date
    Apr 2012
    Location
    Pittsburgh, PA
    Posts
    165
    I use the Cinch by Luma Labs. http://luma-labs.com/products/cinch

    It attaches at TWO points so the camera cannot "twirl" at all on just one attachment point.

    It also has the oh-so-handy ability to "cinch up" for snug carrying, and to "cinch out" for extra slack for shooting. I love it.
    Canon 6D, Canon EF 16-35 f/2.8 L III; Sigma 35mm f/1.4 "Art"; Canon EF 70-200 f/2.8L IS II, Canon EF 100mm f/2.8 L IS Macro; Canon 24-105 f/4 L ; Canon EF-S 17-55 f/2.8 IS (unused nowadays), EF 85 f/1.8; Canon 1.4x TC Mk. 3; 3x Phottix Mitros+ flashes

  8. #8
    Senior Member Jayson's Avatar
    Join Date
    Jan 2009
    Location
    Nebraska, USA
    Posts
    1,909
    This is the one that I have and use it all the time. Once you get one, you'll never use the old strap again.

  9. #9
    Senior Member Steph's Avatar
    Join Date
    Jun 2012
    Location
    Geneva, CH
    Posts
    143
    I had a look at those BR straps few days ago and they look pretty good but my 7D is always gripped and I'm a bit concerned by the whole camera +lens being carried with two screws and therefore two weak points...

    Also, in which situations do you prefer a BR strap over a lowepro toploader (see reviews in the review section)?

  10. #10
    Senior Member
    Join Date
    Nov 2011
    Location
    Big Mouse Florida
    Posts
    1,190
    Steph,
    Just what environment are you looking to use this in? There might be other solutions than a strap. I have a Peak Design Capture clip on the shoulder strap of my small bag - lowenpro photorunner. I use the shoulder strap approach across my left shoulder and the bag on my right hip. (slope shouldered football stuff, I can't keep shoulder strap on unless my neck is in the way). I have it angled, etc so that the camera weight is on the clip and the lens rests on the top of the bag. If I am in real dicey area - over water, etc. I use a handstap threaded through the quick release for the Peak Design.

    It takes a little jiggering around but it is a handy way to take a small bag keep your hands free, move the weight to a broad shoulder strap, etc.

    My two pennies worth.

    Mike
    If you see me with a wrench, call 911

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •