Quote Originally Posted by Dr Croubie View Post
I've always wondered, how much light/power output is given by pressing the test button? It certainly isn't 1/1 or 1/2, on my 430EX (mk1) I can press it a few times in a row without losing so much charge that it has to stop to recharge (battery-dependent, of course), so i'm guessing around the 1/64 mark. Can the higher-model speedlites be programmed to output a certain power from the test-button?
I think it depends what mode you're in. If you're in ETTL, then the flash is calculating the output for you (and varying it accordingly). If you have it in manual mode, then it will fire at whatever power you have the flash set to.

During one of these long exposure, multiple flash popping experiements, I'd suggest keeping the flash set to a relatively low power so that you don't have to wait for it to recycle. Typically speaking, under those conditions, you don't necessarily need anything above 1/8 or 1/16 power anyway. Set it to that kind of power or less, and you could hit the test fire button just about as many times as you wanted within a 5 second exposure and never worry about recycle times.