I have finished a couple DIY projects recently buy only have pictures of the one right now. I just finished a DIY beauty dish. I took the idea from here, DIY Beauty Dish, but there were a couple things that I had some problems with that I will fix in the 2nd generation I make sometime in the future. The Dish is pretty simple to make but if you have a bigger flash you might want to make some adjustments. The gutter piece that he recommends will fit a 430 ex II, but not the 580. You will need to purchase a bigger gutter piece. I would suggest the extendable downspout part and just cut it to fit. I thought the dish was too heavy to be held only by the flash so I made a little bracket. I also kind of broke the dish where I was cutting because I didn't drill around the corners before attempting to cut with the utility knife. A little silicone on that fixed it nicely. All in all, I am happy with the project and will be happy to do it again. I found all of my products for this at Lowe's and it was less than $15. Probably could have been even less if I hadn't needed another can of spray paint due to holding the can too close when spraying the first time. Here are a couple pictures of the throw. I am going to make a sock for it using a white cloth shower curtain.