Results 1 to 10 of 10

Thread: Canon 5DIV

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member
    Join Date
    Dec 2008
    Location
    Ottawa, ON
    Posts
    1,497
    They can solve this without a new battery type, I think, via the battery grip.

    Make it so that when you're using the grip you can choose between two modes: Extended Life, or More Power. Extended Life, is how it works now. I'm not sure if both batteries are used in parallel, sipping power from each, or with the second used as a backup when the first one dies. The More Power mode would use both simultaneously, but rather than sipping, it would use the full power to drive faster AF.

    Maybe the camera would decide on the mode on the fly, sipping from both, and then when doing AF it gulps from both. Perhaps the grip already does this, but Canon doesn't advertise it.
    On Flickr - Namethatnobodyelsetook on Flickr
    Canon: R8 | R7 | 7DII | 10-18mm STM | 28-70mm f/2.8 | 50mm f/1.8 | 85mm f/1.8 | 70-300mm f/4-5.6L | RF 100-500mm f/4.5-7.1L
    Sigma: 18-35mm f/1.8 Art | 35mm f/1.4 Art | 50-100mm f/1.8 Art Laowa: 100mm 2X Macro

  2. #2
    Senior Member
    Join Date
    Dec 2008
    Posts
    1,156
    Quote Originally Posted by DavidEccleston View Post
    Make it so that when you're using the grip you can choose between two modes: Extended Life, or More Power. Extended Life, is how it works now. I'm not sure if both batteries are used in parallel, sipping power from each, or with the second used as a backup when the first one dies. The More Power mode would use both simultaneously, but rather than sipping, it would use the full power to drive faster AF.

    Maybe the camera would decide on the mode on the fly, sipping from both, and then when doing AF it gulps from both. Perhaps the grip already does this, but Canon doesn't advertise it.
    If the grip has two batteries in it, the menus show how many shots were taken on each, so it definitely seems it's some sort of "use one battery at a time". The counts are rarely 1:1, so it has some sort of switching logic that perhaps waits for all card writes to finish before it switches, or something like that.
    We're a Canon/Profoto family: five cameras, sixteen lenses, fifteen Profoto lights, too many modifiers.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •