Canon 40D blurry images

[Daniel Browning]

How do you do this on the 40D? I can't find the function in-camera to microadjust. Is it something in DPP?

Sorry, my mistake. The 40D doesn't have it.

[bob williams]

I had similar issues with my 50D and 100-400L, some things to try:


1. Put the camera/lens on your tripod. go to live view magnify x10 and focus on anything. if you see vibration or movement, it may be the tripod-----That was my problem.


2. Also check the Sharpness of thepicture stylesetting you normally use.


3. After zooming, I would suggest that you refocus on your subject


4. I am not sure if it is a new feature on pixel peeper, but you can look at picture from specific lens/body combinations, butyou have to go to lenses first----try taking a look and see what others are doing with the same combo. Try this link:


http://www.pixel-peeper.com/adv/?lens=15&camera=714&perpage=12&focal_m in=none&focal_max=none&aperture_min=none&a mp;aperture_max=none&iso_min=none&iso_max= none&exp_min=none&exp_max=none&res=3

[jks_photo]

Hi john,


I would suggest that you hav the camera body checked. My friend had the same problem with his 40D and it couldn't have come at a worse time. It was on a wedding photo coverage.


If i remember correctly it had a something to do with the shutter or a chip in the camera body that controls the exposure. It was resolved at very minimal cost.


Do give it a try. Good Luck!

[scalesusa]

Try your lens on a different camera. If images are ok, its the body. If they are blurry, its the lens or the photographer.