Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Canon 5D MK III help required

  1. #1
    Senior Member
    Join Date
    Aug 2012
    Posts
    205

    Canon 5D MK III help required

    Hi all,

    I've been asked to do photography for a few gigs coming up such as ballroom dancing and as a second photographer for a wedding. So, stupid me went out and sold my 6D (which I was comfortable with) and bought a 5D MK III. Now, the camera is great. In the store I was taking some test shots with their demo model and noticed when you focused on something it would show a "map" of the AF points and where it was focusing. I've tried on my camera and all that shows up is the centre point then when it achieves focus it flashes red?? How do I turn on the previous setting where it shows where it's focusing?

    I know how to manually select the focus point, it's basically the same as the 6D with far more options, but how do I turn that setting back on?

    Also, does anyone know of a good online manual on how to use settings in a practical sense? I've got the manual but it has no practical examples here but the first gig is in a few days and I need to get good at this asap

  2. #2
    Super Moderator Kayaker72's Avatar
    Join Date
    Dec 2008
    Location
    New Hampshire, USA
    Posts
    5,665
    Hi Squidy,

    I am not entirely sure what you are refer, but I haven't had my morning coffee yet. But, to select your AF style, first select the mode using the mode dial. Then hit the top right button on the back of the 5DIII (just about the thumb rest, nearest to where the strap connects). Then, use the "M-Fn" button to scroll through different options for your AF point set up.

    As for a good book, I do find the actual manual to be useful.

  3. #3
    Senior Member
    Join Date
    Nov 2011
    Location
    Big Mouse Florida
    Posts
    1,187
    The M-Fn button is that tiny little dot of a button next to the shutter button.

    I would also suggest that you select the focus area of the center 9 boxes.

    Best of luck.

    Mike
    If you see me with a wrench, call 911

  4. #4
    Senior Member
    Join Date
    Nov 2011
    Location
    Big Mouse Florida
    Posts
    1,187
    The pocket guide has the quick way of picking the center point using the joystick.
    If you see me with a wrench, call 911

  5. #5
    Senior Member
    Join Date
    Dec 2008
    Location
    Ottawa, ON
    Posts
    1,466
    Just a note that the paper manual is a subset of the actual manual (at least it was for the 7D2). The PDF version of the manual included on your install DVDs is a much more detailed manual that actually covers all the features.
    On Flickr - Namethatnobodyelsetook on Flickr
    R8 | R7 | 7DII | 10-18mm STM | 24-70mm f/4L | Sigma 35mm f/1.4 | 50mm f/1.8 | 85mm f/1.8 | 70-300mm f/4-5.6L | RF 100-500mm f/4-5-7.1L

  6. #6
    Senior Member
    Join Date
    Dec 2008
    Posts
    1,156
    You probably need to go into the menus for custom controls, and change/add behavior to the joystick so it becomes the 8-way joystick for choosing focus points. But honestly, you need to sit down with a manual to learn the AF system, as I call it "multi-dimensional":

    You can pick One Shot or AI Servo (focus and lock vs. keep focusing).
    You can use the point(s) six ways: single point spot, single point (normal-size), single point plus four helpers in a "+", single point plus eight helpers in a box, zone, or "you pick the starting point and it tracks the subject thereafter".
    You can of course pick which point/zone to use within the six modes above.
    You can tweak three sliders to influence the behavior of the focus tracking and point selection tracking. There are 75 possibilities across the three sliders, but there are six "Cases" that are assumed to be ideal uses of these sliders.
    We're a Canon/Profoto family: five cameras, sixteen lenses, fifteen Profoto lights, too many modifiers.

  7. #7
    Senior Member neuroanatomist's Avatar
    Join Date
    Dec 2008
    Location
    Boston, MA
    Posts
    3,878
    Sounds like the camera in the store was set to automatic AF point selection (IMO, it's a Bad Idea to let your camera pick your subject for you, it's just not that smart). The default is single point selection at the center point, which you can move around with the joystick (by pressing the AF point seelction button first, unless you set the custom controls for direct selection which I highly recommend).

    But most importantly, as peety3 states you need to spend time with the manual and with the camera and get completely comfrotable before you use it for real gigs.

  8. #8
    Senior Member
    Join Date
    Aug 2012
    Posts
    205
    Thanks all. Well, I'm at work now and sitting here with the camera and manual so hopefully I can work it out. If not I can just hire the 6D for a day and go that way. I have no doubt I'll be able to learn this camera, but damn is it a step up from my other camera I've owned. Going from the 650D to 6D was easy as it was very similar, but 6d to 5d is a massive jump in complexity.

  9. #9
    Senior Member
    Join Date
    Dec 2008
    Posts
    1,156
    Google the 1Dx af setting guidebook, download it, and LEARN IT. It's one of the best presentations of how the system interacts with the camera out there, way more intuitive than the manual.
    We're a Canon/Profoto family: five cameras, sixteen lenses, fifteen Profoto lights, too many modifiers.

  10. #10
    Senior Member
    Join Date
    Aug 2012
    Posts
    205
    Well, did the shoot today and it went pretty well. My flash died half way through though but I still ended up getting some pretty good shots ... hopefully

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •