Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Removing AF from shutter release

  1. #1
    Senior Member Bill W's Avatar
    Join Date
    Dec 2008
    Location
    Haverhill, MA
    Posts
    662

    Removing AF from shutter release



    Just out of curiosity....how many of you have moved your AF from the shutter release to the AF-ON button? I have the 40D body.


    I have found this change to be much better for capturing wildlife and my photography in general.


    Was this a revelation on my part or just a standard operational procedure? In my reading I haven't come across any suggestions for this adjustment.


    Thoughts?


    Regards


    Bill

  2. #2

    Re: Removing AF from shutter release



    I went to a wildlife photography seminar last Sat. The seminar was presented by John and Barbara Gerlach. It was a good seminar. Anyway, they stressed using the back button for focusing. I tried it and I really like it.


    For landscape shots, I find a focus point using the back button. Then recompose the shot and the focus stays the same but I can now recompose and shoot even if a focus point now happens to be in the sky. I love it!

  3. #3
    Senior Member Mark Elberson's Avatar
    Join Date
    Dec 2008
    Location
    Medford, NJ
    Posts
    1,045

    Re: Removing AF from shutter release



    On my 50D I have it programmed so that I can use either the AF-ON button or the shutter release to auto focus. If I don't want the shutter release to "over-ride" the AF-ON buttonI have to hold the AF-ON button while hitting the shutter release. I forget what custom setting this is, but for me I like that I can still use the shutter release to start AF if I want to without having to go into the custom menu.

  4. #4
    Senior Member
    Join Date
    Dec 2008
    Posts
    124

    Re: Removing AF from shutter release



    <span style="font-family: 'Verdana','sans-serif'; color: black; font-size: 6pt;"]


    <span style="font-family: 'Arial','sans-serif'; color: black;"]<span style="font-size: small;"]If you press and hold the "AF-ON" -- recompose, then press the shutter release, you are focusing on the AF-ON subject.<o></o>


    <span style="font-family: 'Arial','sans-serif'; color: black;"]<span style="font-size: small;"]What are you doing different?<o></o>










  5. #5
    Senior Member Bill W's Avatar
    Join Date
    Dec 2008
    Location
    Haverhill, MA
    Posts
    662

    Re: Removing AF from shutter release



    Bob, if your question is pointed towards me.


    I have set my AF-ON/Shutter release to (located in Custom Function lV (C.Fn. lV): Operation/Others #2) in the Menu section of my 40D.


    I use this setting for my wildlife photography (e.g. birds). It allows the exposure to be measured when the picture is taken, but you can press the AF-ON button to activate or halt the AF process as the bird jumps around on branches or flying.


    I find this set up works faster and maintains focus for me while tracking a fast moving subject; i.e. maintaining IS (shutter button partially depressed) and quickly refocusing (by using my thumb to activate the AF-ON button) flying birds. Also, obviously, allows for re-composition w/a still bird.


    I hope this helps clarifies what I'm doing and why Bob.


    Regards


    Bill

  6. #6
    Senior Member
    Join Date
    Dec 2008
    Location
    Chesapeake Virginia
    Posts
    281

    Re: Removing AF from shutter release



    I back button focus probaly 90% of the time, cept I use the astrick expouser lock rather than the af-on button because i shoot portriate in a vertical grip 98% of the time.

  7. #7
    Senior Member
    Join Date
    Dec 2008
    Location
    Anaheim, CA
    Posts
    741

    Re: Removing AF from shutter release



    I don't use it, one less thing to memorize.

  8. #8
    Senior Member Mark Elberson's Avatar
    Join Date
    Dec 2008
    Location
    Medford, NJ
    Posts
    1,045

    Re: Removing AF from shutter release



    Quote Originally Posted by Bob


    <span style="font-size: 6pt; font-family: 'Verdana','sans-serif'; color: black;"]


    <span style="font-family: 'Arial','sans-serif'; color: black;"]<span style="font-size: small;"]If you press and hold the "AF-ON" -- recompose, then press the shutter release, you are focusing on the AF-ON subject.


    <span style="font-family: 'Arial','sans-serif'; color: black;"]<span style="font-size: small;"]What are you doing different?

    <div style="clear: both;"]</div>


    There is one setting where AF is ONLY controlled by the AF-ON button which deactivates the shutter release as an AF trigger. There is another setting where AF is controlled by either the AF-ON button or the shutter release. I don't necessarily want to give up being able to AF with the shutter release but I do like the idea of being able to use the AF-ON button instead. With this particular setting though you have HOLD the AF-ON button or when you go to take the picture the shutter release button will re-focus.

  9. #9
    Senior Member
    Join Date
    Dec 2008
    Location
    Melbourne, FL
    Posts
    1,246

    Re: Removing AF from shutter release



    Quote Originally Posted by Sinh Nhut Nguyen


    I don't use it, one less thing to memorize.






    RIGHT!

  10. #10
    Senior Member
    Join Date
    Dec 2008
    Posts
    1,156

    Re: Removing AF from shutter release



    Quote Originally Posted by Ehcalum


    I back button focus probably 90% of the time, except I use the asterisk exposure lock rather than the AF-ON button because I shoot portrait in a vertical grip 98% of the time.
    <div style="clear: both;"]</div>


    I assume this means you make the button swap because your grip doesn't have an AF-ON button.
    We're a Canon/Profoto family: five cameras, sixteen lenses, fifteen Profoto lights, too many modifiers.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •