Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: 5DsR Bufer wierdness

  1. #1
    Senior Member
    Join Date
    Jan 2009
    Posts
    1,156

    5DsR Bufer wierdness

    I finally remembered to come ask the question here: on my 5DsR, with the camera set to shoot RAW and ISO 100, I see in the viewfinder a buffer size of 12 shots. Whenever I take even just one shot, I instantly see the buffer drop to 9 then climb its way back to 12. Anyone else see this with their 5Ds/5DsR, and perhaps know why it's doing that?
    We're a Canon/Profoto family: five cameras, sixteen lenses, fifteen Profoto lights, too many modifiers.

  2. #2
    Senior Member
    Join Date
    Jan 2013
    Location
    Sainte Angele De Monnoir, Quebec
    Posts
    478
    Could it be that you have a slow card and it is taking a little long to write to it ? I am just guessing but with those huge files and a slow card write speed ...
    Stuart Edwards
    1DX Mark II , 6D , Samyang 14mm f2.8 ,Sigma 85mm f1.4A , 24-105mm f/4L IS , 70-200mm f/2.8L IS II ,100-400 f5.6L II , 300mm f/2.8L II , EF 1.4x III , EF 2x III, 430EX II

  3. #3
    Senior Member
    Join Date
    Jan 2009
    Location
    Central Kentucky
    Posts
    3,619
    Also you might have noise reduction turned on which slows things a bit.

  4. #4
    Senior Member
    Join Date
    Jan 2009
    Location
    Planet Earth
    Posts
    3,110
    Writing jpeg + RAW?

    Honestly I never pay attention to the 5Ds R buffer because it is so shallow.
    I can check tomorrow.

  5. #5
    Senior Member
    Join Date
    Jan 2009
    Location
    Planet Earth
    Posts
    3,110
    I just checked it, I am shooting jpeg + RAW.

    First shot drops to 8 or 9, and as fast as you can count to 12 it pops back up.
    Here is the weird part. As soon as it hits 12 I take another shot. On the second shot it doesn't drop at all it stays at 12.
    If I follow up with a third shot it will drop to 8 or 9 and as fast as you can count to 12 it pops back up.

    Every other shot it drops to 8 or 9 and the next immediate stays at 12.

    So I think what you have seen is the norm. FWIW I was in the house and was shooting at ISO 3200.

  6. #6
    Senior Member
    Join Date
    Jan 2009
    Posts
    1,156
    Fast card: 160MB/sec CF card (fastest I could find last time I shopped for CF cards). RAW only, not RAW+JPEG. No NR turned on (useless in RAW and wasteful since it NRs the embedded jpeg, which is silly).
    We're a Canon/Profoto family: five cameras, sixteen lenses, fifteen Profoto lights, too many modifiers.

  7. #7
    Senior Member
    Join Date
    Jan 2009
    Location
    The Netherlands
    Posts
    2,304
    My 5Ds does exactly the same thing. I'm using a Sandisk 120MB/s card though.Buffer 12, as soon as you take a photo jumps to 9 and pretty much instantly jumps back to 12. However if you use the entire buffer and end up with 3 left for example it will show all inbetween numbers before getting back to 12.
    To be fair I came from a 5D2 so the speed and buffer where a huge step up anyways and I never paid any attention to this

  8. #8
    The number of shots you can take, that's shown in the viewfinder, is an estimation/approximation of what the camera expects to happen. It's not magic truth.

  9. #9
    Senior Member
    Join Date
    Jan 2009
    Posts
    1,156
    Quote Originally Posted by apersson850 View Post
    The number of shots you can take, that's shown in the viewfinder, is an estimation/approximation of what the camera expects to happen. It's not magic truth.
    Let me spell this out for you:
    1) Turn the camera on. Set it as desired. Observe buffer to be 12 shots.
    2) Take one shot. Observe buffer to be 9 shots.

    How does a 12-shot buffer dip to 9 on just one shot? Or, phrased differently, how screwed up does the estimation logic have to be for one shot to magically eat up 25% of the buffer?
    We're a Canon/Profoto family: five cameras, sixteen lenses, fifteen Profoto lights, too many modifiers.

  10. #10
    Senior Member
    Join Date
    Nov 2011
    Location
    Big Mouse Florida
    Posts
    1,187
    base assumption is JPG???? guessing. Clearly a software issue.
    If you see me with a wrench, call 911

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •