Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Question on sharpness-aperture

  1. #1

    Question on sharpness-aperture

    I have a canon 135m L lens, I saw in most of the forums that the picture is really sharp at f value of 2.8
    Can some one tell if there is any direct relation between F value and sharpness

  2. #2
    Senior Member
    Join Date
    Dec 2008
    Location
    Planet Earth
    Posts
    3,110
    The easy answer to your question is that the more you stop the lens down, the deeper the depth of field and your sharpness improves. At a certain point it will start going the other way, there will be a sweet spot that you will get the best IQ out of the lens. At F/11 you may start seeing it decline.

    But I am not sure that was the answer you were looking for, were you looking for a relationship formula that would tell you what the optimum F value would be on a given lens? It would be interesting to see if such a calculator or formula existed. Maybe it would be something like (All F values < F/8). Then maybe not.

  3. #3
    Senior Member
    Join Date
    Dec 2008
    Location
    Planet Earth
    Posts
    3,110
    At the risk of ridicule from other's on the forum, here is a link that might give you some information, and start you down the path of disenlightenment.

    http://www.kenrockwell.com/tech/focus.htm


  4. #4
    Senior Member
    Join Date
    Feb 2012
    Location
    Santa Clara, CA, USA
    Posts
    694
    There are several relations between aperture and sharpness.
    First one is the Depth of Field (DOF). At wide aperture (small f value), the DOF is smaller/shallower, which means only objects at focus distance will be in focus, everything closer or farther away will be blurred. Often that is a desired effect, that's why people like lenses with a wide max aperture. Keep in mind that there are other factors that affect the DOF, distance and focal length.

    Another relation is that it is obviously more difficult to build a lens that at wide apertures produces sharp images (for everything inside the DOF). That is due to the nature of optics. That is why lenses with wide max apertures (small f-values) and great sharpness are typically heavier, bigger and more expensive than lenses with less wide apertures. For example, the 70-200mm f2.8 IS is much heavier, bigger, and more expensive than the 70-200mm f4 IS.

    Most if not all lenses will produce sharper images if you use them not completely wide open, but stopped down 1 stop or two. However, if you stop down too much, diffraction kicks in and the image becomes less sharp. Depending on the sensor that will happen at f-values around 8 to 11 or higher.

  5. #5
    Senior Member
    Join Date
    Feb 2012
    Location
    Santa Clara, CA, USA
    Posts
    694
    Quote Originally Posted by HDNitehawk View Post
    At the risk of ridicule from other's on the forum, here is a link that might give you some information, and start you down the path of disenlightenment.

    http://www.kenrockwell.com/tech/focus.htm

    Not everything there is wrong I guess :-)

    here is another resource:
    http://en.wikipedia.org/wiki/Depth_of_field
    http://en.wikipedia.org/wiki/F-numbe..._image_quality

  6. #6
    Senior Member
    Join Date
    Dec 2008
    Location
    Sweden
    Posts
    478
    Hi, my not too scientific way of understanding it is something like this:

    - Imagine a small point on the subject.
    - This will reflect light in many directions, think of it as rays of light reflected from this small point.
    - A bunch of these rays will travel more or less in parallel towards your lens.
    - Now, to get the image sharp, the lens must bend those rays back into a small point on the sensor.
    - When you use a small aperture, only the centermost rays are let through the aperture and it is "easy" to collect them in a single point on the sensor. Basically all lenses can do this.
    - When you use a large aperture, there are more rays that must be bent correctly into this single point (a larger cross-section area of the lens is used), and to me it seems logical that this is more difficult to achieve.

    When it comes to comparing sharpness at different apertures/focal lengths I find the interactive charts at slrgear.com quite useful. At least for the lenses I own, these graphs seem to reflect what I've also seen in real use. The lens you mentioned, 135L, is known for being very sharp even wide open. This is also illustrated here.

  7. #7
    Senior Member
    Join Date
    Dec 2008
    Location
    Vancouver, Washington, USA
    Posts
    1,956
    Quote Originally Posted by gandhi View Post
    Can some one tell if there is any direct relation between F value and sharpness
    There are several relationships. In general, as you stop down:

    • Less defocus blur (if part of the frame is not within the DOF)
    • Same or less lens aberration blur
    • More diffraction blur


    The optimal F-number for sharpness varies with the lens, camera, and specific circumstances. For example, for one subject, f/16 may be sharper than f/45. But for another subject (that requires more extreme DOF), the f/45 is actually sharper (because it gets the *entire* subject into the DOF instead of just a part of it).

    Indirect sharpness relationships include things like motion blur/noise related to stopping down when you cannot keep exposure the same (e.g. low light).

  8. #8
    Senior Member
    Join Date
    Dec 2008
    Location
    Vancouver, Washington, USA
    Posts
    1,956
    Quote Originally Posted by HDNitehawk View Post
    At the risk of ridicule from other's on the forum, here is a link that might give you some information, and start you down the path of disenlightenment.
    The page you linked, like most of the pages on that site, is riddled with gross inaccuracies. I think it's a disservice to point anyone at that site.

  9. #9
    Senior Member
    Join Date
    Dec 2008
    Location
    Planet Earth
    Posts
    3,110
    Quote Originally Posted by Daniel Browning View Post
    The page you linked, like most of the pages on that site, is riddled with gross inaccuracies. I think it's a disservice to point anyone at that site.
    Going to his site is like picking and eating mushrooms, until you can identify the ones that are poison it is probably best to just stay away. The mushrooms are his points of course.

    It could have been worse; I could have linked to CR as well.

  10. #10
    Senior Member
    Join Date
    Dec 2008
    Location
    Vancouver, Washington, USA
    Posts
    1,956
    Quote Originally Posted by HDNitehawk View Post
    Going to his site is like picking and eating mushrooms, until you can identify the ones that are poison it is probably best to just stay away.
    That's the perfect way to put it!


    Quote Originally Posted by HDNitehawk View Post
    It could have been worse; I could have linked to CR as well.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •