Results 1 to 9 of 9

Thread: What's the Best Way to Capture Exhaust...

  1. #1
    Senior Member rlriii13's Avatar
    Join Date
    Dec 2008
    Location
    Columbus, Ohio
    Posts
    162

    What's the Best Way to Capture Exhaust...



    ...without any light modifiers.


    A friend of mine has been asking about shooting portraits of him with his dirtbike. As I rolled the idea around in my head this morning, I thought of one composition that would include the bike's exhaust plume. Then I realized that might be very difficult to capture, even with strobes and controlled lighting. We will probably be outdoors and without any light modifiers.


    Does anyone have experience trying to capture such a subject? Can you offer me some pointers?

  2. #2

    Re: What's the Best Way to Capture Exhaust...



    Just take the pictures from a point where the smoke is more visible (I know this sounds obvious, but you can try taking the pictures when the smoke is against a contrasting background). Also, shutter speeds below 1/125 could contribute to better capture the smoke and some motion blur.


    I think a polarizer filter could help too.

  3. #3
    Senior Member ham's Avatar
    Join Date
    Dec 2008
    Posts
    384

    Re: What's the Best Way to Capture Exhaust...



    The smoke/steam/whatever will appear denser the more of it you

  4. #4
    Senior Member freelanceshots's Avatar
    Join Date
    Dec 2008
    Location
    Dallas, TX
    Posts
    485

    Re: What's the Best Way to Capture Exhaust...



    depends on if its a 4-stroke dirtbike or 2. For the 2 stroke mix up a small batch of gas with extra oil to get more smoke. On the four stroke you're out of luck if your looking for smoke. Smoke is a bad sign for the 4-stroke.

  5. #5
    Senior Member DLS's Avatar
    Join Date
    Dec 2008
    Location
    British Columbia
    Posts
    258

    Re: What's the Best Way to Capture Exhaust...



    If its a 4-stroke, just add a touch of diesel fuel......that'll blow smoke[:P]


    Well, better not......might be bad for the valves.....


    FWIW, sometimes I've found exhaust is a bitthicker/whiter just after start-up when compared to a warm motor.


    Good luck!


    Damian

  6. #6
    Senior Member clemmb's Avatar
    Join Date
    Dec 2008
    Location
    Bryan, TX
    Posts
    1,360

    Re: What's the Best Way to Capture Exhaust...



    Have the sun behind for back light.


    I was also going to say add oil to the gas but other beat me to it. LOL[]


    Mark
    Mark

  7. #7
    Senior Member rlriii13's Avatar
    Join Date
    Dec 2008
    Location
    Columbus, Ohio
    Posts
    162

    Re: What's the Best Way to Capture Exhaust...



    Backlighting with the sun was my initial plan.


    And, I

  8. #8
    Senior Member ham's Avatar
    Join Date
    Dec 2008
    Posts
    384

    Re: What's the Best Way to Capture Exhaust...



    Cold air temp will increase the condensation in the air (as well as heat-haze I think).


    Will be interested to see how you do.

  9. #9

    Re: What's the Best Way to Capture Exhaust...



    Add it after the fact. Get some photos of the exhaust against a plain background and under your lighting control - then just adjust the scaling, angle, fade and overlay in the image to make it

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •