Results 1 to 1 of 1

Thread: Help needed 3D printing a RingLight housing for AD200/PRO & 24-70 f2.8

  1. #1

    Help needed 3D printing a RingLight housing for AD200/PRO & 24-70 f2.8

    I have a working prototype to use on a FlashPoint/Godox AD200/PRO!

    I have made 4 complete plugin heads using a Canon ML-3 housing & flash tubes to mount on a AD200/PRO that is fully functional including 2 1/2 watt LED focusing lights!

    The ML-3/200 as I call it works very well but is not large enough to use with 24-70mm or 70-200mm f2.8 as well as many others.

    I am hopeful that I can find someone to help with this project.

    I believe using a 3D printer to make a housing for just the flash tube will make a nice lite & portable flash head.

    I believe it is possible to use a similar setup but requiring the use of an extension cable to use it with an AD400PRO! (YES IT IS A 400WS TUBE

    I will be happy to build several units in exchange for helping with the housings.

    I just want to make several for me & my friends.

    Thanks to all that can help!

    -- hide signature --
    Will T.
    "Galleries don't hang DxO charts" David Hull
    Last edited by Will Thompson; 06-08-2020 at 01:07 AM.
    "Galleries don't hang DxO charts" David Hull

    If you see me with a wench, don’t call my wife!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •