Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 34

Thread: Solar filter

  1. #21
    Senior Member neuroanatomist's Avatar
    Join Date
    Jan 2009
    Location
    Boston, MA
    Posts
    3,890
    Thanks again for the tips, Jonathan. I just ordered the ASTF 140 for my 600/4 II, the ASTF 120 that will fit either my 100-300/2.8 (600/5.6 in this scenario) or my daughter's 5" reflector telescope, and a pair of ASBF 50's for my Canon 10x42L's. I also ordered a pair of screw-in aluminum hoods for the binos, the Canon design for the two pairs I have (10x42L and 10x30 IS) is such that there's very little objective lens housing protrusion on which to push-mount the solar filters compared to 'typical' designs like the Nikons on the left.

    Click image for larger version. 

Name:	binos.jpg 
Views:	36 
Size:	16.1 KB 
ID:	3035

  2. #22
    Super Moderator Kayaker72's Avatar
    Join Date
    Jan 2009
    Location
    New Hampshire, USA
    Posts
    5,680
    This is just a friendly reminder to the forum....the eclipse is about 3 months out (April 8, 2024). If you want a solar filter, you likely want to order yours soon. As I recall in 2017, you could get the eyeglasses ~2 weeks before, but legit photography solar filters ran out early, and even a quick review of solar telescopes, those are listed as backordered in a number of outlets.

    BTW, I have recently discovered the app "astrospheric" which has a layer on their map for the 2024 eclipse...some great information on the path, % eclipse by location, and duration.
    Last edited by Kayaker72; 01-05-2024 at 05:59 PM.

  3. #23
    Senior Member Jonathan Huyer's Avatar
    Join Date
    Jan 2009
    Location
    Canmore, Alberta
    Posts
    1,264
    Quote Originally Posted by neuroanatomist View Post
    Thanks again for the tips, Jonathan. I just ordered the ASTF 140 for my 600/4 II, the ASTF 120 that will fit either my 100-300/2.8 (600/5.6 in this scenario) or my daughter's 5" reflector telescope, and a pair of ASBF 50's for my Canon 10x42L's. I also ordered a pair of screw-in aluminum hoods for the binos, the Canon design for the two pairs I have (10x42L and 10x30 IS) is such that there's very little objective lens housing protrusion on which to push-mount the solar filters compared to 'typical' designs like the Nikons on the left.

    Click image for larger version. 

Name:	binos.jpg 
Views:	36 
Size:	16.1 KB 
ID:	3035
    Can you let me know which lens hoods you got for the Canon 10x42? I have the same binos and agree that it's tough to attach the filters to it. I tried the size 50 first and it was too small. Then I went with a pair of size 70, and could not get them both on at the same time. So I decided on a hybrid solution which I think is going to work really well: I will attach a filter to one lens only, and add a few elastics to make sure it's on firmly. Then I can put the lens cap on the other lens, and view the partial phase through the filtered lens only. When the eclipse is total, I can flip off the lens cap quickly and switch to that side (unfiltered). That will be faster and simpler than trying to remove two filters from the binos. But I'm keen to hear more about your solution.
    Last edited by Jonathan Huyer; 01-07-2024 at 04:40 PM.

  4. #24
    Super Moderator Kayaker72's Avatar
    Join Date
    Jan 2009
    Location
    New Hampshire, USA
    Posts
    5,680
    Quote Originally Posted by Jonathan Huyer View Post
    Can you let me know which lens hoods you got for the Canon 10x42? I have the same binos and agree that it's tough to attach the filters to it. I tried the size 50 first and it was too small. Then I went with a pair of size 70, and could not get them both on at the same time. So I decided on a hybrid solution which I think is going to work really well: I will attach a filter to one lens only, and add a few elastics to make sure it's on firmly. Then I can put the lens cap on the other lens, and view the partial phase through the filtered lens only. When the eclipse is total, I can flip off the lens cap quickly and switch to that side (unfiltered). That will be faster and simpler than trying to remove two filters from the binos. But I'm keen to hear more about your solution.
    Hey Jonathan.

    I guess the Canon 10x42 set of binos is popular. I have a pair as well. In 2017, my sister called watching the eclipse (non-totality) through them her favorite part.

    They take 52 mm filters.

    I have ordered a set of these from Thousand Oaks:

    Threaded Camera Filters – Thousand Oaks Optical

  5. #25
    Senior Member neuroanatomist's Avatar
    Join Date
    Jan 2009
    Location
    Boston, MA
    Posts
    3,890
    Quote Originally Posted by Jonathan Huyer View Post
    Can you let me know which lens hoods you got for the Canon 10x42? I have the same binos and agree that it's tough to attach the filters to it. I tried the size 50 first and it was too small. Then I went with a pair of size 70, and could not get them both on at the same time.
    Apologies, I missed this question. I use the Baader ASBF 50. Given your comments above about needing to quickly remove the filters during the totality, I wanted to avoid threaded filters. Looking at the binos, I assumed the Baader filters would not have anything to grab onto, so I took advantage of the threading and ordered a pair of these 52mm threaded hoods. The setup with the ASBF 50s and the hoods works great, and the hoods are short enough they don't vignette at all.

  6. #26
    Senior Member Jonathan Huyer's Avatar
    Join Date
    Jan 2009
    Location
    Canmore, Alberta
    Posts
    1,264
    Brant and Neuro -- thanks for the great info. The screw-on filter from Thousand Oaks is a good option for sure, although it might be better to just use one of them. Then you could view the eclipse through the filtered lens during the partial phase while keeping a lens cap firmly on the unfiltered lens. Then when totality hits, you can pop the lens cap off the unfiltered side and gawk away safely until totality ends. Or I suppose you could carry two pairs of binoculars, one with filters and one without! Either way, I found viewing totality through unfiltered binoculars to be the greatest sight in nature I have ever seen. You get incredible details, from the prominences to the exquisite filaments in the corona. It's definitely worth having some magnification to enjoy that to the fullest.

    I'll go with the lens hood that Neuro suggests, since I already have the Baader filter.

    Thanks again!

  7. #27
    Senior Member
    Join Date
    Nov 2011
    Location
    Big Mouse Florida
    Posts
    1,190
    Couple of items: Just got the 5d3 back from lifepixel - both IR and UV cut have been removed. Suggestions for testing are appreciated.

    For the solar eclipse I am planning on using the same system I used for the annular eclipse - filter holder w/ solar film. For exposure 'jumps' from from pre to totality and back, planning on using the Custom mode to preset the jump about 10 stops.

    Would love to figure out something for the full spectrum 5d3 - have the tamzooka which has a 95 mm thread or the 70-200 with a 2x for 400mm reach and a 77 mm thread. I know a 77mm H-alpha would be pretty spending at these diameters...... IF you could find one and IF it wouldn't result in the sensor being fried. Any thoughts, suggestions, would be appreciated.
    If you see me with a wrench, call 911

  8. #28
    Super Moderator Kayaker72's Avatar
    Join Date
    Jan 2009
    Location
    New Hampshire, USA
    Posts
    5,680
    Hi Mike...

    I know we've chatted about this. I do worry that the Ha filters you are talking about are for astro, not solar. Ha filters for astro fall into "narrow band" imaging as light for astro is typically coming from reactions involving oxygen, hydrogen (Ha), and sulfur. Thus, if you look for a "narrow" band around those emissions, you can pull out different and get more detail of nebula, etc.

    But the real purpose of narrow band imaging is to avoid issues from light pollution. By focusing on wavelengths from space, you minimize the impacts of light emanating here on the planet (which is different wavelenghts) and bouncing around our atmosphere, interfering with the final image. So, the intent of narrowband imaging is to clean up the light hitting a sensor and to focus it on what is coming from Space.

    But, "narrow band" for astro is typically 10-30 nm. When I've looked at Ha filters for solar imaging, they are trying to tightly focus on the peak of hydrogen alpha, 656.3 nm. Single stack are typically getting you a 0.7 nm range around the peak, and then double stack are usually less than 0.5 nm. So, solar imagers are really trying to be ~656.0 nm to ~656.5 nm, or tighter.

    While I do not know this for sure, my concern is that 10-30 nm is not narrow enough and will let too much other light through, thus washing out Ha. So, it would be a red, detail-less image. I could be wrong. I know this as I was looking into the exact same thing but have so far opted to not go for it.

    BTW, why Ha? This stuff facinates me, different light (and gravity for that matter) come from different layers of the sun. The different layers being at different temperatures, pressures, and even compositions support different reactions. At the very surface, the chromosphere which is hotter (~20,000C), is a reaction where the electron in hydrogen changes state with the temperature causing it to rise (to n=3), and as it falls (to n=2) it releases 656.3 nm light. Electron state change from n=3 to n=2 is called an "alpha"...as this is coming from a hydrogen atom, you get "hydrogen alpha" light.

    White light mostly comes from the photosphere, which is just below the chromosphere. But the chromosphere being the surface, to see what is happening on the surface, you look for Ha bandwidth.

    Getty back to my concern, if you do not get narrow enough around 656.3 nm, other light from the photosphere may still drown out the Ha light, thus the details of the chromosphere that we all want to see.

    Like I mentioned, I've looked into it. I've decided to save my money at this point, but if I was to do it, I was leaning toward getting a Lunt 50 mm single stack dedicated solar telescope. The primary reason being, turns out, to get good photos of Ha, most solar photographers are using monochromatic cameras as our darn Bayer arrays actually are not tuned to Ha light. So, to do it well, you likely need both a dedicated telescope and a dedicated camera. That is a bridge too far for me.

    So, for now, I am still thinking of just using white light filters with my camera lenses.

    Thanks,
    Brant
    Last edited by Kayaker72; 01-25-2024 at 12:02 PM.

  9. #29
    Senior Member
    Join Date
    Nov 2011
    Location
    Big Mouse Florida
    Posts
    1,190
    I am going to at least double stack.

    The 1st filter will be the solar film - 1st attempt - with the Ha after it. 2nd attempt will be the 10x nd filter with the HA after it. I will absolutely test the the 2nd attempt w/ a non camera rig - basically a large magnifying glass projecting to a board of some sort with temps being measured from ambient. Much of a step up in temp is a no go.

    The higher reputation youtube folks pointed out that about 40% of the light from the sun - getting through the atmosphere/ozone layer - is IR we can't see, 50% visible and 10% UV. Excluding IR/Visible make UV exposure values drop.

    I totally get that the visible/uv cut filters likley allow a very broad IR light stream in which might be too diffused in its origin to create any texture in the sun surface - we will find out when the filters arrive.
    If you see me with a wrench, call 911

  10. #30
    Senior Member neuroanatomist's Avatar
    Join Date
    Jan 2009
    Location
    Boston, MA
    Posts
    3,890
    Getting close now. We're fortunate here, the weather forecast for northern Vermont is clear and sunny (though this is New England where they say, "If you don't like the weather, wait 5 minutes,"). Looks like much of the rest of the US path has less of a chance of clear weather.

    I'm planning to use the R3 with the 600/4 II + 1.4xIII with the Baader ASTF 140 filter, mounted on the RRS TVC-33 with a side gimbal. We have eclipse glasses for the whole family, the Canon 10x42L binos with Baader ASBF 50 filters, and a couple of Nocs Provisions 8x32 monoculars with eclipse filters that the kids can look through and/or use for digiscoping with their phones.

    My daughter has decided not to bring her telescope, so I have a 'spare' Baader ASTF 120 filter, thinking about what (if anything) to do with that. It will fit the hood of the 100-300/2.8, so I could set that up with the 2x TC on my travel tripod (RRS TQC-14)...but honestly one camera is probably sufficient, and I was planning to use the travel tripod for the 10x42L binoculars (I have a little Hejnar plate on it that used to go on my M/M2 but I don't use on the M6/M6II since the dedicated Acratech M5/M6 plates fit better). I could mount it in front of a camcorder and video the eclipse in addition to taking photos.

    Mike, any results from playing with your full spectrum camera? I have a full spectrum M6 (along with a UV bandpass and several IR longpass filters). Given the discussion above, I could clamp the ASTF 120 to a tripod leg (i.e. held in a Justin clamp connected to an RRS multiclamp on the leg) and shoot through it with the M6 handheld (or tripod-mounted). I haven't had a chance to play with that with the sun, and we may not have sun here until Monday anyway.

    Certainly, I plan on just viewing the eclipse with binoculars and with eyes using regular eclipse glasses (and not, during the totality) – I don't want to spend the whole time looking through/at the camera.

    Brant, are you heading north? We're likely going to Newton, VT.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •