Printable View
just wanted to ask you all for any tips on removing a stuck lens filter.
the lens (with filter) was in my camera bag without the lens cap on, and i accidentally bashed it. the rim of the filter is bent/dented at one point - thanks God that the lens seems to be undamaged!
but now i can't removed this lens filter... do i need to buy one of those special tools to remove it??
thanks
Quote:
Originally Posted by dbdb
If its that stuck, then most likely you should. Always useful to have one in case of "emergency".
split the tube of a bicycle tire in have and trim a strip the diameter of your lens + a couple of more inches for holding. This will give you some good grip.
...or buy one of these tools. I bought them and they work quite well. They're cheap, inexpensive, yet do the job well. Because of shipping, I'd suggest buying some other things from B&H at the same time so that you don't end up paying for shipping charges only for the wrenches. Just make sure to buy the write size wrench for the job.
Here's Byran's review of the item Sean suggested.
http://www.the-digital-picture.com/Reviews/Lens-Filter-Wrench-Review.aspx
Jayson
thanks for all the feedback guys - i think i will have to buy one of
those filter wrenches, because it really isn't coming off any time soon!
ps: has that tyre tubing trick really worked for you ehcalum??
The good thing about the filer wrench is that it applies even pressure around the filter when trying to remove it. This helps prevent damage to the filter.
Many times db, it also works for oil filters, pickle jars and other tight fitting objects.
That's a shame. Do make sure you try the bike tube / rubber grip before you order a tool. Any nice, maliable, grippy rubber will work. Bike tubes are nice and free-- go to any bike shop and asked for a popped one. They universally have dozens and dozens on hand, which they just toss out. I use them as lashings, so I often grab trashbags at a time.
I use one of those small square rubber grips designed to get the lids off jars.
Be careful that the damage hasn't extended into the threads on the front of the lens. You may need Canon's help if the lens itself has damage to the threads that is locking the filter in place.
Just cut it off with a 9" angle grinder and hope you don't hit the front element of the lens [:P]
I was thinking a crowbar would do it...
Or hit it with a hammer a few times, see if that loosens it...
okay, despite some of the latest "suggestions" i have ordered a set of filter wrenches off of ebay - i really hope that they'll do the job
the stuck/damaged filter isn't stopping me from taking photos with this lens at the moment, but it is a bit of a nuisance. especially as the lens cap doesn't fit on properly anymore